Tutorial for covering a diaper/wipe case
Enjoy crafting at home!
Enjoy crafting at home!
What you need: travel-sized wipes case (find them at Babies R’ Us!), scrapes of material and batting, 1 3/4 yards trim (about 1/2-inch wide), 1/3 yard elastic, glue gun, and scissors


Put a line of glue along the back edge of the case and pull your fabric a little as you press it onto the hot glue. Stuff some batting into the ‘pocket’ you just made.

Glue the other short end right along the edge. Pull your fabric a little as you press it onto the glue. Glue the last edge and pull your fabric as you press it down.

Trim off your excess fabric. You want the fabric to hang off the edge a little but not into the area where the case opens and closes.

Glue your trim on the TOP of the case starting in the back. Take your time and don’t put too much glue or it will come through your trim.

Once you get to where you started, cut your trim so your ends will meet perfectly with no overlapping.

For the bottom, you’ll want to glue two pieces of elastic about 1.5-inches from each end to hold diapers. Glue them on the short end where the case opens and not on the top part because you’ll want to be able to give enough room for the diapers.
Thanks to my forever friend for showing me how to make these!
2 Comments
I'm going to have to try this one of these days!
ps. I am sooooooo jealous that you are in Utah right now…
February 28, 2013 at 7:21 ami never knew it was so easy to make these! I can't believe a glue gun is all it takes, I'm totally going to try it! Thanks for posting this!
February 28, 2013 at 7:21 am